رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
W/turned up peripheral reinforcement edge w/0.188 in. Outside corner radius
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Square or rectangular recess
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.406 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
11.875 inches
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
0.188 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, multi holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
20.000 inches
MRC:
A measurement of a straight line from the midpoint of a rounded corner to its periphery.ADNU
Corner Radius:
2.688 inches
Hole Quantity Along Length:
10
Hole Quantity Along Width:
6
Distance Between Holes Along Length:
3.750 inches
Distance Between Holes Along Width:
3.250 inches
Distance Between Hole Centerline And First Hole Along Length:
2.000 inches
Distance Between Hole Centerline And First Hole Along Width:
1.938 inches
Distance From First Hole Centerline To End Along Length:
2.750 inches
Distance From First Hole Centerline To End Along Width:
2.688 inches
First Recess Inside Height:
0.438 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
0.188 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Threaded fastener
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Unthreaded hole
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Cylinder block, industrial diesel engine
