رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Packing Retainer
MRC:
The length of a straight line which passes through the center of a cross section,and terminates at the inside circumference.ADVK
Cross Section Inside Diameter:
Between 0.610 inches and 0.630 inches
MRC:
The length of a straight line which passes through the center of a cross section,and terminates at the outside circumference.ADVL
Cross Section Outside Diameter:
Between 1.496 inches and 1.498 inches
MRC:
A measurement from the bottom to the top of a cross section,in distinction from depth.ADVN
Cross-sectional Height:
Between 0.430 inches and 0.450 inches
Outer Groove Depth:
Between 0.0485 inches and 0.0505 inches
Outer Groove Width:
Between 0.090 inches and 0.110 inches
Body Recess Diameter:
Between 0.8165 inches and 0.8185 inches
Body Recess Depth:
Between 0.377 inches and 0.383 inches
Inner Groove Depth:
Between 0.04825 inches and 0.05025 inches
MRC:
A measurement taken at right angles to the length of the inner groove,in distinction from thickness.ADWA
Inner Groove Width:
Between 0.090 inches and 0.110 inches
Angle:
Between 43.0 degrees and 47.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams4121 assn standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Ams2470 assn standard single treatment response
