رقم الجزء 2-300-011

Duplex Ball Bearing

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 801.26 and 1081.701 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
2-300-011
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
008631206

معلومات الجزء
In accordance with the premium aircraft quality rqmt of lycoming turbine engineering specification e 100, retainer silver-plated 0.0005 to 0.0015 in. Thk per ams 2412, stabilized for operation at minus 65 degrees to plus 600 deg, three grooves 0.0400 to 0.0500 in. Wide by 0.0150 in. To 0.0200 in. Deep equally spaced on inner faces of outer rings, thrust markings v etched on od and id surfaces of outer and inner rings, bore and od surfaces 16 micro-inches, inner and outer ring raceway surfaces 8 micro-inches, retainer pocket surfaces 30. Micro-inches, ball 2 micro-inches split inner ring, 4 point ball contact

NSN
رقم المخزون الوطني:
3110-00-863-1206 3110008631206
TXT
وصف:
Duplex Ball Bearing
INC
INC
رمز اسم العنصر:
30213
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
46.00 millimeters
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
65.00 millimeters
MRC:
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.ADGA
Overall Outside Diameter:
120.00 millimeters
MRC:
An additional finishing process by which the surface of an item is altered in respect to polishing,grinding,and the like.AGYE
Surface Finish:
Ground
MRC:
The means used in manufacturing the retainer.AGYF
Retainer Fabrication Method:
Machined
MRC:
The direction of load with respect to the shaft axis.AGZC
Load Direction:
Angular
MRC:
The clearance between the bearing rings and the rolling elements.AKVV
Internal Clearance:
0.0033 inches radial and 0.0043 inches radial
MRC:
The standard tolerance designation indicating the manufactured limitations of the item as established by the various specifications and standards.CTFZ
Standard Tolerance Designation:
Abec no.5
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy retainer
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel ball
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel inner ring
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel outer ring
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
92d counterbored outer rings, non-separable, tandem mounting

{lang[cimilar]} Duplex Ball Bearings

« Bearings Antifriction Unmounted {lang[catalog]}
قارن الآن»
واضح | أخفى