رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Torsion Helical Spring
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
0.580 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ABQK
End Style:
Parallel both ends
MRC:
The length of a straight line which passes through the center of the stock,and terminates at the circumference.ACVU
Stock Diameter:
0.069 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Nha2010600; pacer dawn
Spring Free Length:
1.440 inches
MRC:
The number of coils included on the item.APCN
Coil Quantity:
4
MRC:
An indication of the coil helix direction.AXLH
Coil Helix Direction:
Right-hand or left-hand
Spring Free Outside Diameter:
0.718 inches
Center Loop Radius:
Between 16.000 inches and 20.000 inches
MRC:
An indication of the angular relationship of the ends of the item.AXMH
End Angular Relationship:
End w/lh helix of coil parallel to center section or end w/rh helix of coil parallel to center section
End Length:
0.560 inches both ends
End Length From Coil Axis To First Bend:
0.290 inches both ends
End Length From First Bend To Second Bend Or End:
0.270 inches both ends
End Length From Second Bend To Third Bend Or End:
0.600 inches both ends
MRC:
The preformed shape of the middle section of the item.CXWF
Center Style:
U type
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 302
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-w-423 cond b federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-s-5002 military specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Double torsion, right and left hand
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Spring shall operate over a .500 dia. Pin through total deflection of 100 deg
