رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Two holes 0.182 in. Min and 0.190 in. Maximum dia, countersunk 81 degrees, one ctr hole 0.560 in. Min and 0.570 in. Max, ctr to ctr distance btw bolt holes is 2.500
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.182 inches and 0.190 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 2.980 inches and 3.020 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 0.980 inches and 1.020 inches
Outside Corner Bevel Length Along Width:
0.380 inches
Outside Corner Bevel Length Along Length:
0.380 inches
MRC:
A measurement of the center to center distance between the bolt holes along the length.ADUZ
Center To Center Distance Between Bolt Holes Along Length:
Between 2.495 inches and 2.505 inches
Outside Edge To Bolt Hole Center Distance Along Length:
0.250 inches
Bolt Hole Centerline To Nearest Edge Distance:
0.500 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
3
MRC:
The number of laminations provided.BRDX
Lamination Quantity:
52
MRC:
The distance between the opposite flat surfaces of the individual laminations.BRDY
Lamination Thickness:
0.003 inches
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Separable
MRC:
The structural characteristic of the item.CQCF
Construction:
Laminated
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy b850.0
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Non-circular w/square corners
