رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
0.940 inches
MRC:
The length of a straight line which passes through the center of an item,and terminates at the outside circumference.ABHE
Outside Diameter:
5.792 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
3.997 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
27
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.ABSC
Spline Minor Diameter:
0.813 inches
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
5.108 inches
MRC:
A measurement taken at right angles to the length of the face,in distinction from thickness.AQPL
Face Width:
2.900 inches
MRC:
The physical configuration of the item.ARJD
Design Form:
Webbed
MRC:
Indicates the type of bore used on the item.ASBP
Bore Type:
Involute spline
MRC:
The pressure angle of the spline,expressed in degrees.AXFG
Spline Pressure Angle In Deg:
30.0
MRC:
A measurement of the longest dimension of a spline,in distinction from width.AXFH
Spline Length:
2.900 inches
MRC:
An indication of whether or not a counterbore feature is included.AXND
Counterbore Feature:
Not included
MRC:
A measurement of the spline pitch diameter.BDTX
Spline Pitch Diameter:
0.044 inches
MRC:
An indication of whether or not a lightening hole/s/ is included.BXSJ
Lightening Hole:
Not included
MRC:
An indication of the characteristic of the protruding hub.BYDZ
Protruding Hub Characteristic:
Plain
MRC:
Designates the belt,chain,or film size for which the item is designed.BYFH
Belt/chain/film Size For Which Designed:
Ladder chain
MRC:
The number of rows of teeth provided.BYFL
Teeth Row Quantity:
2
MRC:
The center to center distance between the teeth rows.BYFM
Center To Center Distance Between Teeth Rows:
2.390 inches
MRC:
The number of teeth included in each row.BYFN
Teeth Quantity Per Row:
6
MRC:
The means used to test the rated hardness of an item.BYFQ
Hardness Rating Test Method:
Not rated
MRC:
An indication of whether or not a bore bearing is included.BYFS
Bore Bearing:
Not included
MRC:
An indication of whether or not a hub external keyway is included.BYFW
Hub External Keyway:
Not included
MRC:
The center to center distance between teeth measured along the pitch line.BYGF
Tooth Pitch:
1.575 inches
Hub End Outside Diameter And Location:
1.225 inches both ends
Distance From Outside Flange/rim To Hub End And Location:
0.437 inches both ends
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, mil-s-81591, type 17-4)byfqdn
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel, mil-s-81591, type 17-4)byfqdn
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Webbed or spoked
