رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Secondary filter; 180.0 gph; weapon system essential
TXT
وصف:
Fluid Filter Element
MRC:
The length of a straight line which passes through the center of the smallest end of a tapered hole,and terminates at the circumference.AAZL
Tapered Hole Minor Diameter:
0.640 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the circumference.ABPM
Body Diameter:
4.250 inches
MRC:
The length of a straight line which passes through the center of the largest end of a tapered hole,and terminates at the circumference.ADMT
Tapered Hole Major Diameter:
0.820 inches
MRC:
The size of the smallest particle which the element is capable of removing from the fluid which passes through the filtering material.ADNH
Filtration Rating In Microns:
2.0
MRC:
The direction in which the fluid is passed through the item.ADNK
Flow Direction:
Outside in
MRC:
The amount of pressure loss in the system,due to the resistance of flow through the item.ADNP
Drop Pressure:
3.0 pounds per square inch
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Parker hannifin, racor div. Series 1000, 73/1000, 75/1000, 77/1000 and 79/1000 turbine fuel filter/water separator; nsn 2320-01-097-0260 hemtt (heavy expanded mobility tactical truck)
MRC:
Indicates the design type of the item.APGF
Design Type:
Nonreusable
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.AZKQ
Tempurature Rating:
Between -50.0 degrees fahrenheit and 225.0 degrees fahrenheit
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the body.AZTL
Bodylength:
9.500 inches
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Feat
MRC:
An indication of the structure or characteristic of the filtering media.CRXW
Filtering Media Design:
Molded single filtering media response
MRC:
The filtering system for which the item is designed to be used.CXZX
Filtering System For Which Designed:
Full flow
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Cellulose filtering medium
MRC:
The type of media for which the item is designed.MEDA
Media For Which Designed:
Any acceptable
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Cylindrical w/ container (rigid)