رقم الجزء
تجريد
صلاحيه
UOM
NIIN
وحدة القياس:
* special requirements. EA
TXT
وصف:
Nonvehicula Universal Joint Yoke
MRC:
The length of a straight line which passes through the center of the largest diameter of the item,and terminates at the circumference.AAZR
Major Diameter:
Between 1.248 inches and 1.250 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
2.500 inches
MRC:
The center to center distance between holes on the item.ABRF
Center To Center Distance Between Holes:
1.436 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
14
MRC:
A measurement taken at right angles to the length of a fork,in distinction from thickness.AGBT
Fork Width:
4.250 inches
MRC:
The length of a straight line which passes through the center of the smallest diameter of the item,and terminates at the circumference.AGJR
Minor Diameter:
Between 1.083 inches and 1.085 inches
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
1.1667 inches
MRC:
The length of a straight line which passes through the center of the bolt hole,and terminates at the circumference.AHNX
Bolt Hole Diameter:
0.344 inches
MRC:
The measurement between specified points of the fork,in distinction from height.AKYX
Fork Depth:
0.275 inches
MRC:
The distance from the centerline of the universal joint spider to the hub end,measured along a line parallel to the longitudinal axis of the hub.AMBA
Length From Universal Joint Spider Centerline To Hub End:
1.438 inches
MRC:
The outside length of the machined surface finish measured along a line parallel to the longitudinal axis of the hub.AMBB
Hub Machined Surface Finish Outside Length:
1.032 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the bore.ANTP
Bore Style (non-core):
Err-090
MRC:
The pressure angle of the spline,expressed in degrees.AXFG
Spline Pressure Angle In Deg:
30.0
MRC:
A measurement of the longest dimension of a spline,in distinction from width.AXFH
Spline Length:
1.032 inches
MRC:
A measurement from the bottom to the top of the fork, in distinction from depth.BRGT
Fork Height:
4.500 inches
MRC:
An indication of whether or not an outer periphery machined surface finish is included.BSYF
Outer Periphery Machined Surface Finish:
Included
MRC:
An indication of whether or not the hub end is threaded.BSYJ
Hub End Thread Provision:
Unthreaded
MRC:
An indication of whether or not a hub bore is included.BSYL
Hub Bore:
Included
MRC:
Indicates the type of spline(s) on the end of the shaft.BTBR
Shaft End Spline Type:
Involute
MRC:
The physical configuration of the outside of the item.BTBZ
Outside Shape:
Round
Bearing Recess/keyway Depth:
0.275 inches
Distance From Flange To Yoke:
1.031 inches
MRC:
Indicates the type of connection end on the item.BYRC
Connection End Type:
Hub
MRC:
The number of splines on the shaft.CZKU
Shaft Spline Quantity:
14
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator (non-core):
Err-090
