رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Itme must comply with requirements of defense supply center philladelphia production standard no po00205nrp
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Double oval
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
Between 1.377 inches and 1.438 inches
MRC:
Indicates whether or not a ferrous alloy object has been subjected to a process whereby the outer portion is made substantially harder than the inner portion or core.AASG
Casehardening Indicator:
Not casehardened
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 1.567 inches and 1.628 inches
Major Thickness:
Between 0.041 inches and 0.045 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the ring.ACXD
Ring Style:
Spiral
MRC:
Indicates the designed use of the item.ALBY
Usage Design:
Internal
MRC:
The load in tension applied in a longitudinal direction or the load that can be applied in a plane perpendicular to the axial centerline without rupture or permanent deformation of the material.AWQD
Strength Rating:
200000.0 pounds per square inch tensile
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Feat
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, mil-s-5059, type 302 or steel, ams 5519 or steel, qq-s-766, class 302
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 302 or steel comp 301 or steel comp 302
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-s-5059, type 302 military specification 1st material response and ams 5519 assn standard 2nd material response and qq-s-766, class 302 federal specification 3rd material response
MRC:
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.SPCL
Special Test Features:
Special control testing
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
81349-mil-p-23199 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
