رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
204-076-053-11
MRC:
The basic material of which the body is fabricated.AAFZ
Body Material:
Aluminum alloy, qq-a-268, comp 2024, t4-canceled
Second End Outside Diameter:
0.593 inches
MRC:
The provision/s/ for mounting the item.ABDR
Mounting Provision:
Pin
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
-65.0 degrees celsius
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
180.0 degrees celsius
MRC:
A measurement of the longest dimension of a mounting facility,in distinction from width.ABKP
Mounting Facility Length:
0.500 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
Between 2.980 inches and 3.030 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
2.600 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
0.625 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
0.801 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
0.885 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
0.938 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
0.957 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
1.000 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
1.066 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
Between 1.390 inches and 1.410 inches
MRC:
The angle of the end surface upon which the mated surface seats,expressed in degrees.AJFY
Seat Angle In Deg:
120.0
MRC:
The length of a straight line which passes through the center of a hole or body of the first end,and terminates at the circumference.AMDX
First End Hole Diameter:
0.3437 inches
MRC:
The pressure at which an item is designed to operate.BGST
Pressure Rating:
Not rated
MRC:
The means used to operate the integral valve.CKRM
Integral Valve Operation Method:
Hydraulic
MRC:
An indication of the design characteristics of the item.CKSD
Design Characteristics:
Double acting single cylinder
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first piston rod end.CKSF
First Piston Rod End Style:
Fork type (clevis)
First End Largest Inside Diameter:
Between 0.249 inches and 0.250 inches
First End Fork Width:
0.700 inches
First End Fork Depth:
1.600 inches
First End Fork Span Width:
0.751 inches
MRC:
Indicates the type of mounting and the location on the item.CLML
Mounting Type And Location:
Trunnion center section
MRC:
The length of a straight line which passes through the center of the mounting facility,and terminates at the circumference.CLMQ
Mounting Facility Diameter:
0.4986 inches
MRC:
The length of a straight line which passes through the center of the mounting facility,and terminates at the circumference.CLMQ
Mounting Facility Diameter:
0.4991 inches
MRC:
Indicates the location and number of ports on the item.CLMS
Port Location And Quantity:
2 piston rod end
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the port.CLMT
Port Style:
Gasket seal
MRC:
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter on the port.CLMW
Port Thread Series Designator:
Unjf
MRC:
The length of a straight line which passes through the center of the port and would bound the crest of an external thread or the root of an internal thread.CLMX
Port Thread Diameter:
0.437 inches
MRC:
A measurement of the number of screw threads on the port per linear inch,including incomplete threads,on a line parallel to the thread axis.CLMY
Port Thready Qty Per Inch (tpi):
20
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal port thread.CLNB
Port Thread Class:
3b
MRC:
A feature of the item of supply which must be specifically recorded when the reference number covers a range of items.ZZZY
Reference Number Differentiating Characteristics:
As differentiated by part no. 204-076-053-11, fsmc 97499
