رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
32 starts 1.00 lead
TXT
وصف:
Optical Element Retaining Ring
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
Zb
MRC:
The minimum and maximum pitch diameter limits of a straight screw thread.AAJE
Thread Pitch Diameters:
+1.3437/+1.3490 inches
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Left-hand
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.ABET
Thread Length:
0.452 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 0.904 inches and 0.906 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
1.614 inches
MRC:
Designates the thread diameter and number of threads per specific measurement scale.ABUJ
Thread Size:
1 364/1000-32
MRC:
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.ABVL
Aperture Diameter:
Between 1.300 inches and 1.304 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
5855-01-228-0939 night vision goggles
MRC:
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.AJYP
Screw Thread Series Designator:
Uns
MRC:
Indicates the location of the thread on the item.APJC
Thread Location:
Internal
MRC:
A measurement of the smallest dimension of an internal flange,in distinction from length or width.BMTL
Internal Flange Thickness:
Between 0.453 inches and 0.454 inches
MRC:
An indication of whether or not a knurled periphery is provided.BPDQ
Knurled Periphery:
Provided
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Plastic
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic
MRC:
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.SPCL
Special Test Features:
Interpret drawing iaw dod-std-100c; marked iaw mil-std-130
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Flash and gate projections shall not exceed .005 in.
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Night vision equipment, emitted and reflected radiation
