رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
209-4788589item10l1
TXT
وصف:
Machine Thread Plug
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2a external
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand external
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.454 inches external and 0.469 inches external
MRC:
A measurement from the bottom to the top of the head,in distinction from depth.AASU
Head Height:
0.306 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.000 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.AHNC
Connection Style:
External seat for gasket seal
MRC:
The length of a straight line which passes through the center of the body core,and terminates at the circumference.AJFC
Body Core Diameter:
0.656 inches
MRC:
An inside measurement between specified points on a core,in distinction from height.AJFD
Core Depth:
0.766 inches
Bleeder Hole Center To Threaded End Distance:
0.313 inches
Bleeder Hole Diameter:
0.062 inches
MRC:
Indicates the type of head provided.AJGD
Head Type:
Solid
MRC:
Indicates the type of body provided.AJGE
Body Type:
Cored
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
12 external
MRC:
The maximum pressure at which the item is rated for operation.CQGM
Maximum Operating Pressure:
4500.0 pounds per square inch
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
1.062 inches external
MRC:
The angle of the end surface upon which the mated surface seats.CQRB
Seat Angle:
45.0 degrees
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Zzzy
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Nickel alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-n-281 federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Plug, machine w/bleeder holes
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Un external
MRC:
A feature of the item of supply which must be specifically recorded when the reference number covers a range of items.ZZZY
Reference Number Differentiating Characteristics:
Quality control in accordance with navships 0948-045-7010 material identification and control for level 1
