رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Gear assembly, lubo supply and scavenge pumps-f/b propulsor
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
4 1st end6 2nd end
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Phm hydrofoil ships; not used on an other military equipment
MRC:
A measurement of the longest dimension of the leg,in distinction from width.AHSJ
Leg Length:
51.8 millimeters 1st end175.0 millimeters 2nd end
MRC:
A nominal measurement taken at right angles to the length of an item,in distinction from thickness.AKGF
Width:
90.0 millimeters 1st end
MRC:
A nominal measurement of the longest dimension of an item,in distinction from width.AKGG
Length:
114.0 millimeters 1st end
MRC:
The physical configuration of the flange.ARKN
Flange Shape:
Rectangular with holes 1st endround with holes 2nd end
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Flange 1st endflange 2nd end
MRC:
The angle that the flow is turned from the straight flow.CRFY
Flow Angle:
45.0 degrees
MRC:
The nominal length of a straight line which passes through the center of an item,and terminates at the outside circumference.CWCD
Outside Diameter:
114.3 millimeters 2nd end
MRC:
A nominal measurement of the smallest dimension of an item,in distinction from length or width.CWCK
Thickness:
5.75 millimeters 1st end5.75 millimeters 2nd end
MRC:
The nominal length of a straight line which passes through the center of the bolt hole,and terminates at the circumference.CWCQ
Bolt Hole Diameter:
8.33 millimeters 2nd end
MRC:
The nominal length of a straight line which passes through the center of the bolt circle,and terminates at the circumference.CWCT
Bolt Circle Diameter:
88.9 millimeters 1st end96.82 millimeters 2nd end
MRC:
The center to center nominal distance between bolt holes along the length of an item.CWCY
Center To Center Distance Between Bolt Holes Along Length:
88.9 millimeters 1st end
MRC:
The center to center nominal distance between bolt holes along the width of an item.CWDC
Center To Center Distance Between Bolt Holes Along Width:
50.8 millimeters 1st end
MRC:
The design of the flange face.CWDF
Flange Face Design:
Plain 1st endraised straight 2nd end
MRC:
A nominal measurement from the bottom to the top surface of a raised face,in distinction from depth.CWDH
Raised Face Height:
2.25 millimeters 2nd end
MRC:
The nominal length of a straight line which passes through the center of a raised face,and terminates at the circumference.CWDL
Raised Face Diameter:
63.8 millimeters 2nd end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 304
MRC:
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.SPCL
Special Test Features:
Hydrostatic test to 1050 kn/m2. No visual leaks permitted
