رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Flight safety critical
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 4.438 inches and 4.442 inches
MRC:
A measurement of the longest dimension of the shaft,in distinction from width.ABXF
Shaft Length:
Between 3.632 inches and 3.642 inches
MRC:
The number of teeth included on the item.AJLA
Teeth Quantity:
38
MRC:
The length of a straight line which passes through the center of a gear,and terminates at the outside circumference.AJWS
Gear Outside Diameter:
Between 4.457 inches and 4.462 inches
MRC:
Indicates the type of shaft end provided.ANJS
Shaft End Type:
Splined straight
MRC:
The number of teeth per inch of pitch diameter.AQGH
Diametral Pitch:
8.650
MRC:
A measurement taken at right angles to the length of the face,in distinction from thickness.AQPL
Face Width:
Between 0.750 inches and 0.760 inches
MRC:
Indicates the type of shaft included on the item.CRSJ
Shaft Type:
Shouldered
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Feat
MRC:
Indicates the type of teeth included on the item.CWMW
Teeth Type:
Spiral
MRC:
The direction the teeth curve when viewed from the edge of the item.CWNM
Tooth Direction:
Right
MRC:
The measurement of the pressure angle on the item.CWPP
Pressure Angle:
20.0000 degrees
MRC:
The measurement of the pitch angle on the item.CWQD
Pitch Angle:
69.0000 degrees
MRC:
The chemical compound or mechanical mixture properties of which the shaft is fabricated.CYEQ
Shaft Material:
Steel comp e9310
MRC:
The chemical compound or mechanical mixture properties of which the gear is fabricated.CYER
Gear Material:
Steel comp e9310
MRC:
The numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale and its location.CYES
Hardness Rating And Location:
90.0 rockwell superficial 15-n and 91.5 rockwell superficial 15-n
MRC:
The length of a straight line which passes through the center of a shaft,and terminates at the largest circumference.CYET
Shaft Largest Diameter:
Between 1.869 inches and 1.870 inches
MRC:
Indicates the location of the gear on the shaft.CYEU
Gear Location On Shaft:
On end of shaft
MRC:
Designates the size of the shaft end included on the item.CYEW
Shaft End Size:
1.333 inches
