رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Three additional holes on 2.562 in. Bolt circle diameter 0.279 in. Min to 0.289 in. Maximum dia; over all od 3.062 in., flatted on two sides; 63.0 microin finish on id of mounting holes; four additional holes 0.186 in. In to 0.193 in. Maximum dia, equally spaced radially
TXT
وصف:
Bearing Retaining Plate
Minor Thickness:
Between 0.7450 inches and 0.7550 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the circumference.ABPM
Body Diameter:
2.0617 inches
MRC:
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.ABVL
Aperture Diameter:
1.437 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the mounting hole(s).ADFU
Mounting Hole Arrangement Style:
Single bolt hole circle
MRC:
The number of holes in a bolt circle.ADPM
Bolt Circle Hole Quantity:
2
MRC:
An overall measurement of the smallest dimension of an item,in distinction from length or width.ADUM
Overall Thickness:
2.750 inches
MRC:
The length of a straight line which passes through the center of a mounting bolt circle,and terminates at the circumference.AFFL
Mounting Bolt Circle Diameter:
2.562 inches
First Counterbore Diameter:
Between 1.6532 inches and 1.6534 inches
Second Counterbore Diameter:
Between 1.6532 inches and 1.6534 inches
Second Counterbore Depth:
1.528 inches
First Counterbore Depth:
0.472 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
20
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.250 inches
MRC:
Indicates the type of mounting hole(s) provided on the item.CWJW
Mounting Hole Type:
Round, threaded
MRC:
A measurement of the smallest dimension of the flange, in distiction from length or width.CWTF
Flange Thickness:
0.2500 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 2024
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-a-8625, type 2, class 2 military specification single treatment response
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unc
