رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
The item is coated with a drying type preservative oil conforming to dwg1603000; a second set of bolt holes consisting of 0.250-20unc-3b-bottom tap number (209) drill 0.650 inch deep plus 0.31 and minus 0.31 inch variation countersunk 90 degrees minus 0 and plus 10 degrees variation with a diameter of 0.281 inches with four holes
TXT
وصف:
Bearing Retaining Plate
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
2.675 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.406 inches
MRC:
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.ABVL
Aperture Diameter:
1.250 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the mounting hole(s).ADFU
Mounting Hole Arrangement Style:
Four holes
Distance Between Holes Along Length:
1.937 inches
Distance Between Holes Along Width:
1.937 inches
Distance From Vertical Centerline To Center Of Right Hole:
0.968 inches
Distance From Horizontal Centerline To Center Of Right Hole:
0.968 inches
MRC:
Indicates the type of mounting hole(s) provided on the item.CWJW
Mounting Hole Type:
Round, unthreaded
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1020
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm a575 assn standard single material response or astm a576 assn standard single material response or astm a108 assn standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Phosphate manganese
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Square
