رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
A second set of bolt holes with 0.250-20unc-3bx.50 min full thd depth hole depth 1.06 maximum and csk 90 degrees plus or minus 10 degrees by 0.28 inches plus or minus 0101 inch; the third set of bolt holes with 0.3125-18unc-3b through 2 holes are 180 degrees apart
TXT
وصف:
Bearing Retaining Plate
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Raised surface w/aperture
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
5.000 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
Between 0.342 inches and 0.352 inches
MRC:
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.ABVL
Aperture Diameter:
Between 1.751 inches and 1.752 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the mounting hole(s).ADFU
Mounting Hole Arrangement Style:
Two bolt holes circles
MRC:
An overall measurement of the smallest dimension of an item,in distinction from length or width.ADUM
Overall Thickness:
2.375 inches
First Bolt Circle Diameter:
2.687 inches
Second Bolt Circle Diameter:
4.375 inches
MRC:
A measurement from the bottom to the top of a raised surface,in distinction from depth.CKSR
Raised Surface Height:
1.281 inches
Counterbore Diameter:
2.625 inches
First Bolt Circle Hole Quantity:
6
Second Bolt Circle Hole Quantity:
6
Counterbore Depth:
0.562 inches
MRC:
Indicates the type of mounting hole(s) provided on the item.CWJW
Mounting Hole Type:
Round, unthreaded
Inside Raised Surface Diameter:
Between 2.312 inches and 2.313 inches
Outside Raised Surface Diameter:
3.187 inches
MRC:
A measurement of the smallest dimension of the flange, in distiction from length or width.CWTF
Flange Thickness:
0.376 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-a-8625, type ii, class 2 military specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Round
