رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Tapered Roller Bearing
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
2.6250 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
6.0000 inches
MRC:
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.ADGA
Overall Outside Diameter:
10.0000 inches
Backface Corner Radius:
0.1250 inches
Standout Width:
0.7500 inches
Cone Corner Radius:
0.2810 inches
Cone Width:
2.6250 inches
MRC:
A measurement taken at right angles to the length of the cup,in distinction from thickness.AGWY
Cup Width:
1.8750 inches
MRC:
The standard tolerance designation indicating the manufactured limitations of the item as established by the various specifications and standards.CTFZ
Standard Tolerance Designation:
Afbma class 2
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4320 cup or steel comp 4620 cup
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4320 cone or steel comp 4620 cone or steel comp 8620 cone or steel comp e52100 cone
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-624 federal specification 1st material response cone or 66 federal standard 2nd material response cone
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-624 federal specification single material response cup
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Straight bore, normal angle
