رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
2145qimax short anvil
TXT
وصف:
Pneumatic Impact Wrench
MRC:
The different speeds at which the item may be operated.ABBB
Speed Adjustments:
Variable speed
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
217.0 millimeters
MRC:
Indicates the type of handle designed to be attached to or through an item for the purpose of opening,lifting,closing,or the like.ADQF
Handle Type:
Pistol grip
MRC:
The length of a straight line which passes through the center of a bolt,and terminates at the circumference.AHNY
Bolt Diameter:
0.750 inches
MRC:
An indication of the unit of measure and the numeric torque limit for which the item is designed.AJCG
Torque Capacity:
Between 271.0 meter-newton and 1220.0 meter-newton
MRC:
The length of a straight line which passes through the center of the hose for which the item is designed,and terminates at the inside circumference.AJER
Hose Inside Diameter For Which Designed:
13.0 millimeters
MRC:
The number of impact blows which the item will make within a specific period of time.AKUL
Impact Blows Per Minute:
1150.0
MRC:
The nominal length of a straight line which passes through the center of the threaded air inlet, and terminates at the circumference.AKUM
Air Inlet Thread Diameter:
0.266 inches
MRC:
The required operating pressure expressed in pounds per square inch.AKVU
Operating Pressure In Psi:
90.0
MRC:
The name and number of parts supplied with the item which may be required for application.AKYD
Accessory Components And Quantity:
Protective tool boot (2145m-boot)
MRC:
The level of a signal or sound relative to a specific distance,expressed in decibels.AQFK
Loudness Level In Decibels:
96.3
MRC:
A numeric value which indicates the size of the drive surface.ATNC
Drive Surface Size:
0.750 inches
MRC:
Indicates the type of drive end provided.BRZR
Drive End Type:
Male spindle
MRC:
The speed at which an item can be operated under a no load condition,expressed in revolutions per minute.BRZT
No Load Speed In Rpm:
6300.0
MRC:
An indication of the drive for which the item is designed.BRZX
Drive For Which Designed:
Straight
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Reversible
MRC:
The physical configuration of the drive end.CTCT
Drive End Shape:
Square
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Short anvil, 1, 350 ft-lb, weight 3.35 kg, twin-hammer impact mechanism, steel hammer case and composite housing, 1-hand forward and reverse switch, 4-position power regulator.
