رقم الجزء 217838

Headed Grooved Pin

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 47.36 and 63.936 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
217838
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
007856717

معلومات الجزء
0.250 in. Diameter hole drilled through shank longitudinal to axis tapped 1/4-20 unc 0.530 in. Deep at hd end, 0.080 in. Diameter hole drilled in shank 0.827 in. From bearing surface of hd

NSN
رقم المخزون الوطني:
5315-00-785-6717 5315007856717
TXT
وصف:
Headed Grooved Pin
INC
INC
رمز اسم العنصر:
02382
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
0.437 inches
MRC:
A measurement of the longest effective dimension of an item.ABNZ
Effective Length:
1.892 inches
MRC:
None.ABPA
Undercut Diameter:
Between 0.340 inches and 0.343 inches
MRC:
None.ABPB
Under Head Length:
2.085 inches
MRC:
None.ABPC
Undercut Width:
Between 0.039 inches and 0.043 inches
MRC:
None.AMCS
First End Taper Length:
0.015 inches
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
38.0 rockwell c and 42.0 rockwell c
MRC:
None.CRMG
First End Taper Angle:
45.0 degrees
MRC:
None.CRRG
Pin Head Diameter:
1.028 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
16.0 microinches grip
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
0.070 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4140
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove

{lang[cimilar]} Headed Grooved Pins

« Nails, Machine Keys and Pins {lang[catalog]}
قارن الآن»
واضح | أخفى