رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
One internal circumferential gro ove end of bore 0.047 to 0.052 in. W by 1.248 to 1.258 in. Ia, 1/8 in. From each end, two 7/16 in. Diameter balanceing cups drilled/32 in. Maximum deep, 1/8 in. Min. Apart, in largest dia. Of face, u shape groove 7/16 in. Deep in pulley face on bb side, extending from hub to 25/8 in. Dia
MRC:
A measurement between specified points of a groove,in distinction from height.ABGA
Groove Depth:
Between 0.5172 inches and 0.5272 inches
MRC:
A measurement taken at right angles to the length of a groove,in distinction from thickness.ABGF
Groove Width:
Between 0.401 inches and 0.411 inches
MRC:
The length of a straight line which passes through the center of an item,and terminates at the outside circumference.ABHE
Outside Diameter:
4.063 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.875 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
Between 1.1805 inches and 1.1815 inches
MRC:
A measurement of the longest dimension of a bore.ADGE
Bore Length:
1.875 inches
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
Between 3.008 inches and 3.028 inches
MRC:
A measurement of a line segment extending from the center of a groove to the inside surface.AGWA
Groove Radius:
Between 0.045 inches and 0.060 inches
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Iron, cast
MRC:
A measurement taken at right angles to the length of the face,in distinction from thickness.AQPL
Face Width:
0.781 inches
MRC:
The physical configuration of the item.ARJD
Design Form:
Webbed
MRC:
Indicates the type of bore used on the item.ASBP
Bore Type:
Straight
MRC:
An indication of whether or not bearings are included.AWJQ
Bearings:
Not included
MRC:
The number of grooves provided.AXHQ
Groove Quantity:
1
MRC:
An indication of whether or not a counterbore feature is included.AXND
Counterbore Feature:
Not included
MRC:
An indication of whether or not a keying facility is included.BSGG
Keying Facility:
Not included
MRC:
An indication of whether or not a split hub feature is included.BSYG
Split Hub Feature:
Not included
MRC:
An indication of the relationship between the webbing or spokes and the centerline of the face.BXSH
Web/spoke Relationship To Face Centerline:
Offset
MRC:
An indication of whether or not a lightening hole/s/ is included.BXSJ
Lightening Hole:
Not included
MRC:
An indication of whether or not an integral cooling vane(s) is included.BXSK
Integral Cooling Vane:
Not included
MRC:
The physical configuration of the groove.BXSM
Groove Shape:
U
MRC:
An indication of whether or not a bore feature is included.BYDS
Bore Feature:
Included
MRC:
An indication of the characteristic of the protruding hub.BYDZ
Protruding Hub Characteristic:
Stepped
Hub End Outside Diameter And Location:
1.680 inches aa end and 1.694 inches aa end and 1.690 inches aa end and 1.694 inches aa end and 1.813 inches bb end
Distance From Outside Flange/rim To Hub End And Location:
0.859 inches aa end and 0.234 inches bb end
MRC:
The largest diameter and location of the first step face.BYZL
First Step Face Largest Diameter And Location:
1.930 inches aa end and 1.944 inches aa end
MRC:
The length and location of the first step.BYZN
First Step Length And Location:
0.625 inches aa end
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Webbed or spoked
