رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Wsame as style e3 except for 3 ea 0.089 in. Diameter 0.141 in c to c centrally located and 6 ea 0.055 in. Diameter holes located on 0.634 in. Diameter circle 60.0 degrees apart except hole located at 12-o-clock which is 0.219 in. From center hole
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
0.875 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.211 inches
MRC:
The maximum potential gradient that the insulating material can withstand per mil /0.001 inch/ thickness without rupture.ACGY
Dielectric Material Voltage Rating Per Mil Thickness In Volts:
Not rated
MRC:
The length of a straight line which passes through the center of the shoulder,and terminates at the outside circumference.AGPX
Shoulder Outside Diameter:
0.839 inches
Shoulder Depth:
0.055 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Same as style e3 except for 3 ea 0.089 in. Diameter 0.141 in c to c centrally located and 6 ea 0.055 in. Diameter holes located on 0.634 in. Diameter circle 60.0 degrees apart except hole located at 12-o-clock which is 0.219 in. From center hole
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.MTLC
Material And Location:
plastic, polytetrafluoroethylene err-100 err-100
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.MTLC
Material And Location:
plastic, polytetrafluoroethylene
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Flanged round
