رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Washer, 4th sp ms gear thrust
TXT
وصف:
Thrust Washer Bearing
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Shouldered
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
Between 0.0610 inches and 0.0630 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
2.8750 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the center hole.ABMX
Center Hole Shape:
Round
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 2.1830 inches and 2.1930 inches
MRC:
An overall measurement of the smallest dimension of an item,in distinction from length or width.ADUM
Overall Thickness:
0.1900 inches
MRC:
The length of a straight line which passes through the center of the shank,and terminates at the outside circumference.AGGZ
Shank Outside Diameter:
Between 2.1830 inches and 2.1930 inches
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
69.0 rockwell superficial 15-t and 79.0 rockwell superficial 15-t
MRC:
The feature inherent in the item design to effect lubrication.CTLM
Lubrication Feature:
Groove flat bearing surface
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
8 equally spaced 0.030 inch grooves; bronze surface .008 - .012 each side
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy or copper alloy 797
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Sae j460 no. 792 or 797 assn standard all material responses
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Round
