رقم الجزء 235-11-64

Gasket

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 0.7 and 0.945 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
235-11-64
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
No qup EA
NIIN:
008979750

معلومات الجزء
Aperture incl two 0.406 in. Inside inverted radius w/0.188 in. Inside corner radius for 2 bolt holes located 4.490 in. Min, 5.510 in. Maximum center to center distance between bolt holes along length, one inside inverted radius for one bolt hole w/30 degrees inside corner radius located 3.052 in. Min, 3.062 in. Maximum opposite side of along length, also inside corner bevel 0.500 in. Nom along width, 0.785 in. Nom along length same side; incl outside corner bevel 0.688 in.Non along width, 1.125 in. Non along length on same side and oppositeon same side and opposite on sam side o/a dim of width reduced 1.443 in. Nom of the length

NSN
رقم المخزون الوطني:
5330-00-897-9750 5330008979750
TXT
وصف:
Gasket
INC
INC
رمز اسم العنصر:
04522
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Solid single or composition
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.380 inches and 0.400 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 7.016 inches and 7.031 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 5.381 inches and 5.396 inches
MRC:
A measurement taken at right angles to the length of an aperture,in distinction from thickness.ADUE
Aperture Width:
Between 4.448 inches and 4.458 inches
MRC:
A measurement of the longest dimension of an aperture,in distinction from width.ADUF
Aperture Length:
Between 6.140 inches and 6.155 inches
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
0.062 inches
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
60.0 shore durometer a and 70.0 shore durometer a
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber chloroprene class cr

{lang[cimilar]} Gaskets

« Packing and Gasket Materials {lang[catalog]}
قارن الآن»
واضح | أخفى