رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Automatic flow control/balancing valve
TXT
وصف:
Calibrated Flow Valve
MRC:
The basic material of which the body is fabricated.AAFZ
Body Material:
Nickel-copper alloy, qq-n-281, class a
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Straight thru
MRC:
Items furnished as accessories which are not specified elsewhere.ABFF
Furnished Items:
Union nut and brazing ring
MRC:
The type of service with which the item is designed to be used.ACKL
Media For Which Designed:
Water, salt
MRC:
A narrative description of the type of end connection.ACKM
First End Connection Type:
Unthreaded internal pipe
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ACKN
First End Style Designator:
Socket w/brazing ring
MRC:
The industrial designation or term used to define the nominal diameter of the pipe the end will accommodate.ACLG
First End Pipe Size Accommodated:
0.500 inches
MRC:
Indicates whether or not the second end is identical to the first end.ACLR
Second End Relationship With First End:
Identical
MRC:
The part that controls the flow through the item.ADQU
Flow Control Device:
Diaphragm
MRC:
The number of end connections included in the item.ADQZ
End Connection Quantity:
2
MRC:
The rated valve discharge capacity per unit of time.ADSY
Valve Discharge Flow Rate:
3.0 gallons per minute
MRC:
The maximum pressure of the media on the inlet side at which an item is designed to operate.AEVZ
Maximum Inlet Pressure Rating:
150.0 pounds per square inch
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.AZKQ
Tempurature Rating:
Between 32.0 degrees fahrenheit and 160.0 degrees fahrenheit
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Operating pressure differential 15-150 psig; flow tolerance +or- 10 pct; union ends for silver brazing qq-c-390b alloy 836; constant flow regardless of pressure fluctuation; mfg recommends duplex strainer with 1/32" perforations be installed in system upstream of valves
