رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Lap finish od to 5 microinches rms or less
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Chamfered ends w/end slot
MRC:
Indicates whether or not a ferrous alloy object has been subjected to a process whereby the outer portion is made substantially harder than the inner portion or core.AASG
Casehardening Indicator:
Not casehardened
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.0700 inches
MRC:
The measurement between specified points of the slot,in distinction from height.AAZT
Slot Depth:
0.0625 inches
MRC:
The measurement between specified points of the slot,in distinction from height.AAZT
Slot Depth:
0.0625 inches
MRC:
The distance,measured along a straight line perpendicular to the longitudinal axis of the slot,from one edge to the other.ABGC
Slot Width:
0.063 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 0.53100 inches and 0.53120 inches
End Chamfer Angle In Deg:
45.0
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
One hole through pin
Distance From Centerline Of Hole To End Of Pin:
0.344 inches
Distance From Centerline Of Hole To End Of Pin:
0.344 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
Between 0.2965 inches and 0.3285 inches
MRC:
A measurement of the longest dimension of the body,in distinction from width.ADAQ
Body Length:
Between 2.2965 inches and 2.3125 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the bore.ANTP
Bore Style:
Straight-thru bore
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, federal standard 66, aisi/sae 1016
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1016
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Fed standard 66 federal standard single material response or aisi 1016 assn standard single material response or sae 1016 assn standard single material response
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Air compressor, air brake system
