رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Used in solid waste shredder top level assembly
MRC:
A measurement between specified points of a groove,in distinction from height.ABGA
Groove Depth:
0.312 inches
MRC:
A measurement taken at right angles to the length of a groove,in distinction from thickness.ABGF
Groove Width:
0.380 inches
MRC:
The length of a straight line which passes through the center of an item,and terminates at the outside circumference.ABHE
Outside Diameter:
10.600 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.938 inches
MRC:
A measurement taken at right angles to the length of a keyway,in distinction from thickness.ABRR
Keyway Width:
0.250 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
1.500 inches
MRC:
A measurement of the longest dimension of a bore.ADGE
Bore Length:
1.938 inches
MRC:
The distance from the center of the bore to the bottom of the keyway(s).AEVF
Distance From Center Of Bore To Bottom Of Keyway:
0.875 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Weapons system nimitz class cvn
MRC:
The angle of the v groove,expressed in degrees.AGGS
V Groove Angle In Deg:
40.0
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Iron, cast
MRC:
A measurement taken at right angles to the length of the face,in distinction from thickness.AQPL
Face Width:
1.094 inches
MRC:
The physical configuration of the item.ARJD
Design Form:
Spoked
MRC:
Indicates the type of bore used on the item.ASBP
Bore Type:
Straight
MRC:
An indication of whether or not bearings are included.AWJQ
Bearings:
Not included
MRC:
The number of grooves provided.AXHQ
Groove Quantity:
2
MRC:
An indication of whether or not a counterbore feature is included.AXND
Counterbore Feature:
Not included
MRC:
An indication of whether or not a keying facility is included.BSGG
Keying Facility:
Included
MRC:
Indicates the type of keying facility provided.BSGK
Keying Facility Type:
Keyway
MRC:
An indication of whether or not a split hub feature is included.BSYG
Split Hub Feature:
Not included
MRC:
An indication of the relationship between the webbing or spokes and the centerline of the face.BXSH
Web/spoke Relationship To Face Centerline:
Not offset
MRC:
An indication of whether or not a lightening hole/s/ is included.BXSJ
Lightening Hole:
Not included
MRC:
An indication of whether or not an integral cooling vane(s) is included.BXSK
Integral Cooling Vane:
Not included
MRC:
The physical configuration of the groove.BXSM
Groove Shape:
V
MRC:
The alpha and/or numeric section designation of the standard v-belt for which designed.BXSN
Standard V-belt Section Designation For Which Designed:
3v
MRC:
An indication of whether or not a bore feature is included.BYDS
Bore Feature:
Included
MRC:
Designates the size of the shaft for which the item is designed.BYDW
Shaft Size For Which Designed:
1.500 inches
MRC:
An indication of the characteristic of the protruding hub.BYDZ
Protruding Hub Characteristic:
Plain
Hub End Outside Diameter And Location:
3.875 inches aa end and 2.812 inches bb end
Distance From Outside Flange/rim To Hub End And Location:
0.531 inches aa end and 0.312 inches bb end
MRC:
A numeric value which represents a positive whole value without regard to any unit of measure.NMBR
Quantity:
1
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Webbed or spoked
