رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
The distance,measured along a straight line perpendicular to the longitudinal axis of the slot,from one edge to the other.ABGC
Slot Width:
0.0950 inches first and 0.0980 inches first
MRC:
A measurement of the longest dimension of the slot,in distinction from width.ABGD
Slot Length:
0.1220 inches first
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
0.3440 inches
MRC:
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.ADAS
Body Inside Diameter:
Between 0.4980 inches and 0.5030 inches
MRC:
The length of a straight line which passes through the center of the flange,and terminates at the outside circumference.AEPR
Flange Outside Diameter:
0.6400 inches
MRC:
A measurement taken at right angles to the length of a flange,in distinction from thickness.AGFF
Flange Width:
0.0470 inches
Left Internal Flange Hole Diameter:
0.3900 inches
Interior Flange Hole Diameter:
Between 0.4250 inches and 0.4280 inches
Interior Flange Left End To Centerline Distance:
Between 0.0260 inches and 0.0300 inches
Interior Flange Width:
0.0360 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the means whereby the lubricant is set into the item.AGKH
Lubricant Accommodation Style:
Grooved open both ends
End To Flange Distance:
0.0630 inches
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Chamfered center flange left body corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square center flange outside left corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square center flange outside right corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square center flange right body corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square inside right corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square inside left corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square outside left corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square outside right corner
MRC:
Indicates the type and number of features used for the introduction of a lubricant or an antirotational device.CTJM
Antirotation/lubrication Type And Quantity:
2 slot
MRC:
Indicates the location and number of grooves on the surface of the item.CTMQ
Surface Groove Location And Quantity:
4 internal
Left End Body Diameter:
Between 0.5600 inches and 0.5630 inches
Right End Body Diameter:
Between 0.5600 inches and 0.5630 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
21c-2 solid, external flange, interior flang (s) not located at either end
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Solid, external flange, interior flang (s) not located at either end
