رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
A measurement of the longest dimension of the shank,in distinction from width.AATR
Shank Length:
3.2500 inches
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.4995 inches and 0.5000 inches
MRC:
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.AAZE
Shank Diameter:
Between 1.1870 inches and 1.1970 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.8740 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
1.6250 inches
MRC:
A measurement of a straight line extending from the center of a circle to the end.ABPZ
End Radius:
0.4370 inches
MRC:
The distance laterally from tip to tip of the fork.AJSD
Fork Span Width:
0.6250 inches
MRC:
The length of a straight line which passes through the center of a rod connection bore,and terminates at the circumference.AKYC
Rod Connection Bore Diameter:
0.5000 inches
MRC:
The length of a straight line which passes through the center of a securing pin hole,and terminates at the circumference.AKYE
Securing Pin Hole Diameter:
0.4370 inches
MRC:
The distance measured along a straight line parallel to the longitudinal axis which establishes the acceptable depth of the rod connection bore.AKYG
Rod Connection Bore Depth:
3.2500 inches
Distance From Pivot Pinhole Center To Rod Connection End:
5.1350 inches
Fork Arm Thickness:
0.5000 inches
MRC:
The measurement between specified points of the fork,in distinction from height.AKYX
Fork Depth:
1.0300 inches
MRC:
The physical configuration of the hole.BCLP
Hole Shape:
Round
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-225/8 federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Clevis
