رقم الجزء 2532308

Plate Spacer

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 41.56 and 56.106 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
2532308
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
011931728

معلومات الجزء
Ithere are two holes on the end that are drilled 0.203 inch-with minus 0.02 inch; and plus of 0.05 inch through and the bolt hole slare located 0.250 inches from end and 0.187 inches from side; also 1.750 inches plus and minus 0.005 inches from center to center of bolt holes; the corner on the sides are 0.062 inches by 45 degrees plus and minus 5 degrees; there are two screw holes located 0.625 inches from ends to center of screw holes, the screw holes center is located 0.454 inches from sides and 1.000 inches between screw hole center; the holes are drilled 0.250-20unc-3b through 0.203 and csk 90 degrees plus 10 degrees to a diameter of 0.328 inches with variation of plus of 0.015 inches and a minus 0.005 inches

NSN
رقم المخزون الوطني:
5365-01-193-1728 5365011931728
TXT
وصف:
Plate Spacer
INC
INC
رمز اسم العنصر:
26979
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
2.250 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 0.906 inches and 0.910 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a250/11 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-a-8625 military specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Rectangular

{lang[cimilar]} Plate Spacers

« Bushings, Rings, Shims and Spacers {lang[catalog]}
قارن الآن»
واضح | أخفى