رقم الجزء
تجريد
صلاحيه
UOM
NIIN
وحدة القياس:
* special requirements. EA
معلومات الجزء
3/8 in. Corner radius on small end
TXT
وصف:
Suspension Torsion Bar
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
67.375 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 1.845 inches and 1.855 inches
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.ACLK
First End Thread Class:
2b
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.ACLL
First End Thread Direction:
Right-hand
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.ACMR
Second End Thread Class:
2b
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.ACMS
Second End Thread Direction:
Right-hand
MRC:
A measurement of the longest dimension of a chamfer at the first end.ADGN
First End Chamfer Length:
0.188 inches
MRC:
A measurement indicating the diameter-pitch per measurement scale of the first end.AMDS
First End Pitch Diameter:
2.216 inches
MRC:
A measurement of the extent of complete /full/ internal threads,along a line parallel to the longitudinal axis of the first end.AMER
First End Internal Thread Length:
0.812 inches
MRC:
A measurement indicating the diameter-pitch per measurement scale of the second end.AMGF
Second End Pitch Diameter:
2.115 inches
MRC:
A measurement of the extent of complete /full/ internal threads,along a line parallel to the longitudinal axis of the second end.AMHP
Second End Internal Thread Length:
0.812 inches
MRC:
An indication of whether or not a cover is provided.AQHT
Cover:
Not provided
MRC:
Designates the thread diameter and number of threads per inch of the first end.AQSQ
First End Thread Size:
5/8-11
MRC:
Designates the series/type of the threads of the first end.AQSR
First End Thread Series/type Designator:
Unc
MRC:
Designates the thread diameter and number of threads per inch of the second end.AQSS
Second End Thread Size:
5/8-11
MRC:
Designates the series/type of the threads of the second end.AQST
Second End Thread Series/type Designator:
Unc
MRC:
The structural characteristic of the item.ARQS
Construction:
Solid
MRC:
An indication of the twist direction.ASRX
Twist Direction:
Clockwise
MRC:
The geometric configuration of the first end when viewed in cross section.CFGQ
First End Cross-sectional Shape:
Serrated
MRC:
The number of teeth provided at the first end.CFGR
First End Teeth Quantity:
44
MRC:
A measurement of the longest dimension of the serration at the first end,in distinction from width.CFGS
First End Serration Length:
1.188 inches
MRC:
The length of a straight line which passes through the center of the outermost surface of the first end,and terminates at the circumference.CFGT
First End Major Diameter:
Between 2.241 inches and 2.246 inches
MRC:
The pressure angle of the first end,expressed in degrees.CFGW
First End Pressure Angle In Deg:
50.00
MRC:
The geometric configuration of the second end when viewed in cross section.CFGX
Second End Cross-sectional Shape:
Serrated
MRC:
The number of teeth provided at the second end.CFGY
Second End Teeth Quantity:
42
MRC:
A measurement of the longest dimension of serration at the second end,in distinction from width.CFGZ
Second End Serration Length:
1.500 inches
MRC:
The length of a straight line which passes through the center of the outermost surface of the second end,and terminates at the circumference.CFHB
Second End Major Diameter:
Between 2.140 inches and 2.145 inches
MRC:
The pressure angle of the second end,expressed in degrees.CFHC
Second End Pressure Angle In Deg:
50.00
MRC:
Indicates the physical characteristic of the end of the solid bar at the first end.CFHF
Solid Bar End Characteristic At First End:
Threaded hole
MRC:
Indicates the physical characteristic of the end of the solid bar at the second end.CFHG
Solid Bar End Characteristic At Second End:
Threaded hole
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel, mil-s-45387
