رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Clamp, half, tubing
TXT
وصف:
Section Block Clamp
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
6.000 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
1.000 inches
Distance From Center Of Mounting Hole To Edge Along The Width:
0.500 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
2350-01-080-9088
Center To Center Distance Between First And Second Mounting Holes:
3.120 inches
Center To Center Distance Between First And Third Mounting Holes:
5.000 inches
MRC:
A measurement from the bottom to the top of a block,in distinction from depth.BYGG
Block Height:
0.750 inches
MRC:
The number of clamping holes provided.CWTD
Clamping Hole Quantity:
4
MRC:
The length of a straight line which passes through the center of a clamping hole,and terminates at the circumference.CWWM
Clamping Hole Diameter:
0.406 inches first hole
MRC:
The length of a straight line which passes through the center of a clamping hole,and terminates at the circumference.CWWM
Clamping Hole Diameter:
0.406 inches third hole
MRC:
The length of a straight line which passes through the center of a clamping hole,and terminates at the circumference.CWWM
Clamping Hole Diameter:
1.032 inches fourth hole
MRC:
The length of a straight line which passes through the center of a clamping hole,and terminates at the circumference.CWWM
Clamping Hole Diameter:
1.032 inches second hole
Distance From End To First Mounting Hole Center:
0.500 inches
Distance From End To First Clamping Hole Center:
1.120 inches
Center To Center Distance Between First And Second Clamping Holes:
1.000 inches
Center To Center Distance Between First And Third Clamping Holes:
2.000 inches
Center To Center Distance Between First And Fourth Clamping Holes:
3.380 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Rectangular
