رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
0.781 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.750 inches
MRC:
A measurement of the longest effective dimension of an item.ABNZ
Effective Length:
0.438 inches
MRC:
The number of mounting devices used as a means of attaching the item.ACUP
Mounting Device Quantity:
1
MRC:
The length of a straight line which passes through the center of the mounting end,and terminates at the circumference.AESD
Mounting End Diameter:
0.312 inches
Effective Width:
0.750 inches
MRC:
The means of attaching the item.AXGY
Mounting Method:
Press fit
MRC:
The design characteristic which controls the emergence of light.CQHK
Light Transmission Design:
Translucent lens
MRC:
An indication of the inscription on the item,excluding part number.CQKF
Inscription:
Voice 2 lsb face
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.HUES
Color:
Black inscription
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.HUES
Color:
Green holder
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.HUES
Color:
Green lens
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.HUES
Color:
Green inscription background
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic cellulose acetate lens
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic holder
MRC:
The condition of the item with respect to the texture of the surface.SFCD
Surface Condition:
Smooth face
MRC:
The condition of the item with respect to the texture of the surface.SFCD
Surface Condition:
Smooth back
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Flat
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
13499-266-6207-00 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
