رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Made from aluminum alloy qq-a-200/8, temper t6; vertical leg has 4 holes drilled at 6 degrees 30 sec angle up from horizontal plane and spotfaced 0.500 inch; horizontal leg's 3 holes are counterbored 0.625 inch deep; horizontal leg is below vertical leg when mounted; both legs have a small lip on edge; see drawing for fabrication
MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
1.000 inches
MRC:
A measurement of the longest dimension of the second leg, in distinction from width.ADLL
Second Leg Length:
1.000 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Mk 104 mod 3
Second Leg Width:
3.000 inches
Second Leg Corner Radius:
0.180 inches
First Leg Hole Diameter:
Between 0.215 inches and 0.232 inches
Second Leg Hole Diameter:
Between 0.192 inches and 0.199 inches
Second Leg Distance Between Hole Centers Along Width:
0.750 inches
Second Leg Distance Between First And Second Hole Centers Along Width:
0.750 inches
Second Leg Distance Between Second And Third Hole Centers Along Width:
0.750 inches
Second Leg Distance From Edge To Hole Center Along Width:
1.107 inches
Second Leg Distance From Edge To Hole Center Along Length:
0.500 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
0.250 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
0.250 inches
First Leg Width:
3.000 inches
First Leg Corner Radius:
0.180 inches
First Leg Distance Between First And Second Hole Centers Along Width:
1.000 inches
First Leg Distance Between Second And Third Hole Centers Along Width:
1.000 inches
First Leg Distance From Edge To Hole Center Along Width:
0.500 inches
First Leg Distance From Edge To Hole Center Along Length:
0.562 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
Corner radius
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU
First Leg Hole Arrangement Style:
Three holes
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second leg.AKBU
Second Leg Style:
Corner radius
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the second leg holes.AKCU
Second Leg Hole Arrangement Style:
Four holes
MRC:
An indication of whether or not the second leg is identical to the first leg.CSSP
Second Leg Relationship To First Leg:
Not identical
First Leg Angle:
90.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Angle
