رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Externally Relieved Body Screw
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
Between 0.097 inches and 0.127 inches
MRC:
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.AASB
Fastener Length:
0.500 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Hexagon
MRC:
A measurement from the bottom to the top of the head,in distinction from depth.AASU
Head Height:
0.100 inches
Width Between Flats:
Between 0.240 inches and 0.250 inches
First Diameter From Head:
0.160 inches
Second Diameter From Head:
Between 0.1856 inches and 0.1861 inches
Third Diameter From Head:
0.100 inches
Fourth Diameter From Head:
Between 0.1241 inches and 0.1246 inches
Fifth Diameter From Head:
Between 0.070 inches and 0.075 inches
Distance From Largest Bearing Surface Of Head To End Of First Diameter:
0.025 inches
Distance From Largest Bearing Surface Of Head To End Of Third Diameter:
Between 0.150 inches and 0.152 inches
Distance From Largest Bearing Surface Of Head To End Of Fourth Diameter:
Between 0.175 inches and 0.177 inches
Distance From Largest Bearing Surface Of Head To End Of Fifth Diameter:
0.325 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.ABQZ
Internal Drive Style:
W/o internal drive
MRC:
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.AHYM
Thread Diameter:
0.112 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
40
MRC:
The number of externally relieved diameters on the body,adjacent to the head.CSNG
Externally Relieved Body Diameter Quantity:
5
Distance From Largest Bearing Surface Of Head To End Of Sixth Diameter:
Between 0.373 inches and 0.403 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 303
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm a582 assn standard single material response
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unc
