رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Second cbore through backface 3.9371 in. Diameter min to 3.9379 in. Diameter max, 1.218 in. Nom dp; aperture off ctr and angled from part cl, 0.489 in. Part cl to aperture cl front face, 0.93 in. Part cl to aperture cl back face; eight unequally spaced 0.156 in. Diameter through holes, cbore 0.312 in. Dia; six threaded blind holes in back face, four 0.500 in. Deep 0.164-32 unc-2b threads, two 0.190-32 unc-2b threads for helical coil inserts
TXT
وصف:
Bearing Retaining Plate
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Raised surface w/ aperture
MRC:
The length of a straight line which passes through the center of a counterbored portion of a hole,and terminates at the circumference.AAWY
Counterbore Diameter:
Between 0.248 inches and 0.258 inches
MRC:
The depth of the process used to enlarge part of a hole.AAWZ
Counterbore Depth:
1.514 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
5.343 inches
Minor Thickness:
0.328 inches
MRC:
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.ABVL
Aperture Diameter:
Between 2.281 inches and 2.296 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the mounting hole(s).ADFU
Mounting Hole Arrangement Style:
Four holes
Distance Between Holes Along Length:
2.562 inches
Distance Between Holes Along Width:
2.694 inches
MRC:
An overall measurement of the smallest dimension of an item,in distinction from length or width.ADUM
Overall Thickness:
Between 2.662 inches and 2.666 inches
MRC:
A measurement from the bottom to the top of a raised surface,in distinction from depth.CKSR
Raised Surface Height:
1.047 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
32
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.138 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
32.0 microinches raised surface
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches aperture
Counterbore Diameter:
Between 3.000 inches and 3.015 inches
Distance From Vertical Centerline To Center Of Right Hole:
Between 1.278 inches and 1.284 inches
Counterbore Depth:
0.157 inches
Distance From Horizontal Centerline To Center Of Right Hole:
Between 1.344 inches and 1.350 inches
MRC:
Indicates the type of mounting hole(s) provided on the item.CWJW
Mounting Hole Type:
Round, threaded, counterbored
Inside Raised Surface Diameter:
Between 3.9378 inches and 3.9384 inches
Outside Raised Surface Diameter:
Between 4.263 inches and 4.265 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium excluding bore or aperture and chromate excluding bore or aperture
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-416, type 2, class 2 federal specification single treatment response excluding bore or aperture
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Round
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unc
