رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Headed Grooved Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.870 inches and 0.875 inches
MRC:
A measurement of the longest effective dimension of an item.ABNZ
Effective Length:
Between 1.500 inches and 1.510 inches
Undercut Diameter:
Between 0.817 inches and 0.825 inches
Under Head Length:
Between 1.620 inches and 1.640 inches
Undercut Width:
Between 0.046 inches and 0.049 inches
First End Taper Length:
0.030 inches
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
33.0 rockwell c
MRC:
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.CQSX
Shear Strength:
160000 single pounds per square inch
First End Taper Angle:
45.0 degrees
Pin Head Diameter:
1.070 inches
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
Between 0.080 inches and 0.100 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4340
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-s-5000 military specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-416, type 2, class 3 federal specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove
