رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Observation Window
MRC:
The actual number of full layers of material.AAFW
Ply Quantity:
2
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 12.910 inches and 12.970 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 10.040 inches and 10.100 inches
MRC:
An overall measurement of the smallest dimension of an item,in distinction from length or width.ADUM
Overall Thickness:
0.250 inches
MRC:
An additional finishing process by which the surface of an item is altered in respect to polishing,grinding,and the like.AGYE
Surface Finish:
Polished
MRC:
The ability of the material to transmit light and allow visual perception.AJQE
Material Transparency:
Translucent
MRC:
The temperature of the item at maximum operating pressure.AKTR
Tempurature At Maximum Operating Pressure:
Not rated
MRC:
The protection afforded by the material as rated by the thickness of sheet lead equivalent.AKVH
Radiation Protection Rating:
Not rated
MRC:
Indicates the type of edge on the item.AQQR
Edge Type:
Beveled
MRC:
The maximum pressure at which the item is designed to operate.BJDW
Maximum Operating Pressure:
Not rated
MRC:
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.CQBC
Min. Tensile Strength (psi):
Not rated
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
Not rated
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Glass safety
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Dd-g-451 federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Square corners
