رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Kit, refacing-spherical fittings, external
TXT
وصف:
Aircraft Maintenance Kit
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
F-110-ge-100/f101-ge-102/f-110-ge129/f-118-ge-100/f-110-ge-400/f-118-ge101 engine programs
MRC:
A measurement of the longest dimension of an item unencumbered by packaging or packing,in distinction from width.AJAF
Unpackaged Unit Length:
12.000 inches
MRC:
A measurement taken at right angles to the length of an item unencumbered by packaging or packing,in distinction from thickness.AJAG
Unpackaged Unit Width:
6.000 inches
MRC:
A measurement from the bottom to the top of an item unencumbered by packaging or packing,in distinction from depth.AJAH
Unpackaged Unit Height:
4.000 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Driver assembly c/o a body with a handle, a shaft supported on needle bearings, a cap and a sleeve.The saft is sealed at each end by o-rings. A ball thrust bearing absorbs the thrust load during operation. The axial position of the shaft is adjusted by a nut and locked with a jam nut. The shaft is extended to allow it to be gripped in a drill chuck
MRC:
Describes the capabilities,intended use,and/or purpose for which the item is provided.FTLD
Functional Description:
Refacing kit 2c6527 c/o a driver assembly and seven different sized cutters and collets. The cutters and collets are designed to resurface sizes-3, -4, -5, -6, -8, -10 and -12 an fittings
MRC:
The measured weight of an item unencumbered by packaging or packing material.PKWT
Unpackaged Unit Weight:
8.000 pounds
MRC:
Literature and references available for information pertaining to the item.RDAL
Reference Data And Literature:
F33657-97-c-0016
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Operate drill press at 300rpm for aluminum fittings and 600 rpm for steel fittings
