رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
1.550 inches
MRC:
A measurement of the longest dimension of the second leg, in distinction from width.ADLL
Second Leg Length:
1.550 inches
Second Leg Width:
Between 0.580 inches and 0.620 inches
First Leg Slot Length:
Between 0.420 inches and 0.460 inches
First Leg Slot Width:
Between 0.210 inches and 0.230 inches
Second Leg Distance From Edge To Hole Center Along Width:
Between 0.280 inches and 0.320 inches
Second Leg Distance From Edge To Hole Center Along Length:
0.420 inches
Second Leg Slot Length:
Between 0.420 inches and 0.460 inches
Second Leg Slot Width:
Between 0.210 inches and 0.230 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
Between 0.073 inches and 0.087 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
Between 0.073 inches and 0.087 inches
First Leg Width:
Between 0.580 inches and 0.620 inches
First Leg Distance From Edge To Hole Center Along Width:
Between 0.280 inches and 0.320 inches
First Leg Distance From Edge To Hole Center Along Length:
0.420 inches
First Leg End Radius:
Between 0.480 inches and 0.520 inches
Second Leg End Radius:
Between 0.480 inches and 0.520 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
End radius
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU
First Leg Hole Arrangement Style:
One slot
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second leg.AKBU
Second Leg Style:
End radius
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the second leg holes.AKCU
Second Leg Hole Arrangement Style:
One slot
First Leg Angle:
102.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 321
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5510 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Offset angle
