رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Headless Grooved Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered and counterbored
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 6.350 inches and 6.410 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 4.496 inches and 4.498 inches
MRC:
A measurement of the longest effective dimension of an item.ABNZ
Effective Length:
Between 5.090 inches and 5.150 inches
Undercut Diameter:
Between 4.304 inches and 4.316 inches
Undercut Width:
Between 1.200 inches and 1.250 inches
Second Undercut Width:
Between 1.200 inches and 1.250 inches
First End Counterbore Diameter:
Between 0.970 inches and 1.030 inches
Second End Counterbore Diameter:
Between 0.970 inches and 1.030 inches
First End Counterbore Depth:
Between 0.720 inches and 0.780 inches
Second End Counterbore Depth:
Between 0.720 inches and 0.780 inches
First End Taper Length:
Between 0.470 inches and 0.530 inches
MRC:
A measurement of the longest taper dimension at the second end,in distinction from width.AMFM
Second End Taper Length:
Between 0.470 inches and 0.530 inches
MRC:
Indicates whether or not the second end is identical to the first end.CQBB
Second End Relationship With First End:
Identical
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
45.0 rockwell c and 50.0 rockwell c
MRC:
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.CQSX
Shear Strength:
140000 single pounds per square inch
MRC:
Indicates the location of the first end.CRDY
First End Location:
Both ends
First End Taper Angle:
45.0 degrees
Second End Taper Angle:
45.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4340
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove
