رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Designedfor right hand application
TXT
وصف:
Line Actuating Cylinder Assembly
MRC:
The basic material of which the body is fabricated.AAFZ
Body Material:
Steel
First End Outside Diameter:
0.880 inches
First End Outside Diameter:
0.880 inches all working ends
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
4.469 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
3.600 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
2.250 inches
MRC:
The length of a straight line which passes through the center of a hole or body of the first end,and terminates at the circumference.AMDX
First End Hole Diameter:
Unable to decode
MRC:
The length of a straight line which passes through the center of a hole or body of the first end,and terminates at the circumference.AMDX
First End Hole Diameter:
0.499 inches and 0.500 inches all working ends
MRC:
The length of a straight line which passes through the center of a hole or body of the second end,and terminates at the circumference.AMGS
Second End Hole Diameter:
0.438 inches
MRC:
The length of a straight line which passes through the center of a hole or body of the second end,and terminates at the circumference.AMGS
Second End Hole Diameter:
0.438 inches all working ends
First End Thickness At Mounting Holes:
Unable to decode
First End Thickness At Mounting Holes:
0.620 inches and 0.625 inches all working ends
MRC:
A measurement of the smallest length to which the item may be compressed,in distinction from width.AMQZ
Compressed Length:
27.200 inches
MRC:
A measurement of the longest dimension of an item when it is in an extended position,in distinction from width.ATEM
Extended Length:
32.100 inches
MRC:
The pressure at which an item is designed to operate.BGST
Pressure Rating:
Between 2950.0 pounds per square inch and 3000.0 pounds per square inch
MRC:
The means used to operate the integral valve.CKRM
Integral Valve Operation Method:
Hydraulic
MRC:
An indication of the design characteristics of the item.CKSD
Design Characteristics:
Double acting single cylinder
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first piston rod end.CKSF
First Piston Rod End Style:
Bearing type
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first piston rod end.CKSF
First Piston Rod End Style:
Bearing type all working ends
MRC:
An indication of the similarity of the piston rod ends.CLLP
Piston Rod End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second piston rod end.CLLQ
Second Piston Rod End Style:
Fork type (clevis)
Second End Fork Width:
0.562 inches
Second End Fork Width:
0.562 inches all working ends
Second End Fork Span Width:
Unable to decode
Second End Fork Span Width:
0.562 inches and 0.567 inches all working ends
MRC:
Indicates the location and number of ports on the item.CLMS
Port Location And Quantity:
1 center section
MRC:
Indicates the location and number of ports on the item.CLMS
Port Location And Quantity:
3 piston rod end
MRC:
Indicates the location and number of ports on the item.CLMS
Port Location And Quantity:
1 center section and 3 piston rod end
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the port.CLMT
Port Style:
Gasket seal
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the port.CLMT
Port Style:
Gasket seal all ports
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Hydraulic system, aircraft
