رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Involute spline 1.094 in. From 2nd end
TXT
وصف:
Shouldered Shaft
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Unthreaded cross drilled
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Cross drilled hole and splined (straight)
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
4.000 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
Between 0.2498 inches and 0.2500 inches
MRC:
The length of a straight line which passes through the center of a hole or body of the first end,and terminates at the circumference.AMDX
First End Hole Diameter:
Between 0.0940 inches and 0.0970 inches
First End Distance From Hole Center To End:
1.396 inches
MRC:
A measurement between specified points of the hole at the first end,in distinction from height.AMEB
First End Hole Depth:
Any acceptable
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
Between 0.2498 inches and 0.2500 inches
MRC:
A measurement of the longest dimension of the second end spline,in distinction from width.AMGA
Second End Spline Length:
0.280 inches
MRC:
The length of a straight line which passes through the center of the smallest circular cross section of the second end spline,and terminates at the circumference.AMGB
Second End Spline Minor Diameter:
0.2063 inches
MRC:
The length of a straight line which passes through the center of the largest circular cross section of the second end spline,and terminates at the circumference.AMGC
Second End Spline Major Diameter:
0.2500 inches
MRC:
The length of a straight line which passes through the center of a hole or body of the second end,and terminates at the circumference.AMGS
Second End Hole Diameter:
Between 0.0940 inches and 0.0970 inches
Second End Distance From Hole Center To End:
0.250 inches
MRC:
A measurement between specified points of the hole at the second end,in distinction from height.AMHD
Second End Hole Depth:
Any acceptable
MRC:
The number of steps provided.ATPC
Step Quantity:
3
Second End Spline Quantity:
11
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
Between 0.295 inches and 0.305 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
62.0 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 416
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-763, cond a federal specification single material response
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Sonar set
