رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Flexible Shaft Assembly
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
0.307 inches both ends
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
7.311 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
12 both ends
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.ABSC
Spline Minor Diameter:
0.241 inches both ends
MRC:
A measurement of the longest dimension of the tip,in distinction from width.AEDN
Tip Length:
0.531 inches both ends
MRC:
The length of a straight line which passes through the center of the shank,and terminates at the outside circumference.AGGZ
Shank Outside Diameter:
0.500 inches both ends
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
0.250 inches both ends
MRC:
The element,compound,or mixture of which the core is fabricated.AJXJ
Core Material:
Steel
MRC:
The length of a straight line which passes through the center of the core,and terminates at the circumference.AKMH
Core Diameter:
0.250 inches
MRC:
Indicates the type of end.APTD
End Type:
Round, internal splined both ends
MRC:
The shortest straight line between flats,perpendicular to the height.ASDB
Width Across Flats:
0.750 inches both ends
MRC:
Indicates the type of end connection.AWZY
End Connection Type:
Union ferrule both ends
MRC:
The pressure angle of the spline,expressed in degrees.AXFG
Spline Pressure Angle In Deg:
14.5 both ends
MRC:
A measurement of the longest dimension of a spline,in distinction from width.AXFH
Spline Length:
0.244 inches both ends
MRC:
Indicates the type of spline provided.AXYS
Spline Type:
Involute both ends
MRC:
An indication of whether or not a setscrew(s) is included.BDRL
Setscrew:
Not included both ends
MRC:
The element,compound,or mixture of which the casing is fabricated,excluding any surface treatment.BJPS
Casing Material:
Steel
MRC:
Indicates the type of facility utilized to assemble or disassemble the item.BPPL
Wrenching Facility Type:
Hexagon both ends
MRC:
A measurement of the distance from one side to the opposite side of the cross section of an item and the location.CFQW
Cross Section Size And Location:
0.406 inches diameter both ends
MRC:
The amount of twisting or degree of bending which the item is designed to withstand.CFRM
Torsional Deflection Rating:
5 degrees ft-lb in. Torsional deflection rating in winding direction, 7 degrees ft-lb in. Torsional deflection rating in unwinding direction
MRC:
A measurement of the longest dimension of the casing between ferrules,in distinction from width.CFRP
Casing Length Between Ferrules:
4.625 inches
MRC:
The length of a straight line which passes through the center of the casing,and terminates at the outside circumference.CFRQ
Casing Outside Diameter:
0.445 inches
MRC:
An indication of whether or not a swivel end(s) is provided.CFRT
Swivel End:
Not provided both ends
MRC:
A measurement of the longest straight line across a circular cross-sectional plane of the end of the item.CFRW
Enddiameter:
0.875 inches both ends
MRC:
An indication of whether or not a lubrication fitting(s) is provided.CFRY
Lubrication Fitting:
Not provided both ends
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the core.CFRZ
Corelength:
7.311 inches
MRC:
The direction in which the core is designed to rotate,when viewed axially,from the drive end.CFSB
Core Rotation Direction:
Counterclockwise
MRC:
An indication of whether or not the core(s) is removable.CFSL
Core Removability:
Nonremovable
MRC:
The radius of the smallest operating circle for which the item is designed.CGDN
Minimum Operating Radius:
10.000 inches
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Misc. Acft. Access. And components
