رقم الجزء 315B125-3

Nonvehicular Clutch Disk

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 352.24 and 475.524 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
315b125-3
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
012497195

معلومات الجزء
Heat treat at 1025 deg.F for 4 hours, aircool, per mil-h-6875 hardness to be 155 ksi min.; material: 17-4ph cres steel per ams 5643, cond a

NSN
رقم المخزون الوطني:
3010-01-249-7195 3010012497195
TXT
وصف:
Nonvehicular Clutch Disk
INC
INC
رمز اسم العنصر:
52059
MRC:
The distance,measured along a straight line perpendicular to the longitudinal axis of the slot,from one edge to the other.ABGC
Slot Width:
0.064 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
0.060 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
F-16 aircraft
MRC:
The length of a straight line which passes through the center of the largest diameter of an item,and terminates at the outside circumference.AGWM
Largest Outside Diameter:
0.940 inches
MRC:
Indicates the design type of the item.APGF
Design Type:
Dry
MRC:
The physical configuration of the item.ARJD
Design Form:
Solid
MRC:
Indicates the type of disk.BPLM
Disk Type:
Internal slot
MRC:
The smallest length of a straight line which passes through the center of the two surfaces of a circular item,and terminates at the inside circumference.BSPX
Smallest Inside Diameter:
0.375 inches
MRC:
The angle between the slots,expressed in degrees.BSPY
Angle Between Slots In Deg:
180.000
MRC:
The structural characteristic of the item.CQCF
Construction:
Solid
MRC:
Flexible,capable of being bent,turned or twisted,within limits,without breaking,or rigid,resisting change of form,inflexible.FLEX
Flexibility:
Rigid

{lang[cimilar]} Nonvehicular Clutch Disks

« Torque Converters and Speed Changers {lang[catalog]}
قارن الآن»
واضح | أخفى