رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Lock wire holes drilled in hexagon flats 0.048 in. Through, 2 holes
TXT
وصف:
Fluid Passage Bolt
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Relieved
Concentric Hole Depth:
Between 0.680 inches and 0.700 inches
Concentric Hole Diameter:
Between 0.200 inches and 0.210 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 0.820 inches and 0.860 inches
MRC:
A narrative description of the type of end connection.ACKM
First End Connection Type:
Threaded external tube
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ACKN
First End Style Designator:
Plain
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.ACLK
First End Thread Class:
3a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.ACLL
First End Thread Direction:
Right-hand
MRC:
The shortest straight line between flats,perpendicular to the height.ASDB
Width Across Flats:
0.562 inches
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal thread axis.ATKZ
First End Thread Length:
Between 0.300 inches and 0.400 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the wrenching feature.BBDF
Wrenching Feature Style:
Hexagon
First Diameter From Wrenching Feature:
Between 0.550 inches and 0.560 inches
Second Diameter From Wrenching Feature:
Between 0.335 inches and 0.345 inches
Length From Bearing Surface Of Wrenching Feature To End Of First Diameter:
Between 0.050 inches and 0.060 inches
Length From Bearing Surface Of Wrenching Feature To End Of Second Diameter:
Between 0.240 inches and 0.260 inches
First Radial Fluid Hole Diameter:
Between 0.150 inches and 0.160 inches
Distance From First Radial Hole Center To End Of Bolt:
Between 0.460 inches and 0.480 inches
Length From Bearing Surface Of Wrenching Feature To Bolt End:
Between 0.640 inches and 0.660 inches
Wrenching Feature Height:
0.160 inches
MRC:
The number of threads per linear inch,including incomplete threads,on a line parallel to the thread axis.CQKK
First End Thready Qty Per Inch (tpi):
20
MRC:
A designator distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.CQMM
First End Thread Series Designator:
Unf
MRC:
The designation which is used for the purpose of general identification of the nominal thread size.CQYM
First End Thread Size:
0.437 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 347
