رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
10.620 inches
MRC:
The angle of the conical recess of the hole,expressed in degrees.ABQS
Countersunk Hole Angle In Deg:
82.0
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
1.250 inches
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
10
MRC:
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.ADGA
Overall Outside Diameter:
18.620 inches
MRC:
The length of a straight line which passes through the center of the center hole,and terminates at the circumference.ADYT
Center Hole Diameter:
Between 9.437 inches and 9.440 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
HARN-IS-CHA-FEGE
MRC:
The number of holes provided for aligning the item.AJVW
Alignment Hole Quantity:
5
MRC:
The spacing between the mounting holes.ALXY
Mounting Hole Spacing:
Equally spaced on 11.246 in. Min, 11.254 in. Maximum bolt circle
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Iron, cast err-100 err-100
MRC:
Indicates the braking surface location on the item.AYPQ
Braking Surface Location:
Internal
MRC:
The length of a straight line which passes through the center of the braking surface,and terminates at the circumference.AYQA
Braking Surface Diameter:
Between 16.495 inches and 16.505 inches
MRC:
The measurement taken at right angles to the length of the braking surface,in distinction from thickness.AYQB
Braking Surface Width:
7.440 inches
MRC:
Designates the size of the hole(s) of the item.AYQC
Hole Size:
0.531 in. Dia
MRC:
The spacing between the holes.AYQE
Hole Spacing:
Equally spaced on 11.246 in. Min, 11.254 in. Maximum bolt circle
MRC:
An indication of whether or not a cooling fin/s/ is included.AYQF
Cooling Fin:
Not included
MRC:
An indication of whether or not an adjustment hole is included.AYQH
Adjustment Hole:
Not included
MRC:
An indication of whether or not an inspection hole is included.AYQJ
Inspection Hole:
Included
MRC:
An indication of whether or not an oil drain hole is included.AYQK
Oil Drain Hole:
Not included
MRC:
An indication of whether or not a balancing pad(s) is included.AYQL
Balancing Pad:
Not included
