معلومات الجزء
Inner conveying tube material-rubber, synthetic

NSN

رقم المخزون الوطني:

4720-01-003-6139 4720010036139

TXT

وصف:

Nonmetallic Hose Assembly

INC

رمز اسم العنصر:

20311

MRC:

The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR

Cross Sectional Shape:

Round

MRC:

The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX

Inside Diameter:

0.750 inches

MRC:

A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH

Tempurature Rating:

-40.0 degrees fahrenheit single response and 200.0 degrees fahrenheit single response

MRC:

A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU

Flange Thickness:

0.325 inches 1st end

MRC:

A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU

Flange Thickness:

0.325 inches 2nd end

MRC:

The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV

Outside Diameter:

1.440 inches

MRC:

The length of a straight line which passes through the center of the recess,and terminates at the circumference.ABMD

Recess Diameter:

0.815 inches 1st end

MRC:

The length of a straight line which passes through the center of the recess,and terminates at the circumference.ABMD

Recess Diameter:

0.815 inches 2nd end

MRC:

A measurement between specified points on the recess,in distinction from height.ABMH

Recess Depth:

0.195 inches 1st end

MRC:

A measurement between specified points on the recess,in distinction from height.ABMH

Recess Depth:

0.195 inches 2nd end

MRC:

The minimum inside bending radius formed without stressing or deformation of a flexible item.ACKH

Minimum Inside Bending Radius:

10.000 inches

MRC:

The amount of rotation in a counterclockwise direction needed to bring the centerline of one rigid elbow into coincidence with the centerline of the rigid elbow on the opposite end,expressed in degrees.ADKX

Angle Between Rigid Elbow Fittings In Deg:

180.0

MRC:

The length of a straight line which passes through the center of the flange,and terminates at the outside circumference.AEPR

Flange Outside Diameter:

1.750 inches 2nd end

MRC:

The length of a straight line which passes through the center of the flange,and terminates at the outside circumference.AEPR

Flange Outside Diameter:

1.750 inches 1st end

MRC:

The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.AHNC

Connection Style:

Recessed w/gasket groove 1st end

MRC:

The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.AHNC

Connection Style:

Recessed w/gasket groove 2nd end

MRC:

The design used in constructing the end portion of the flange.AKUT

End Flange Construction:

Solid 1st end

MRC:

The design used in constructing the end portion of the flange.AKUT

End Flange Construction:

Solid 2nd end

MRC:

The physical configuration of the outside of the end connection.AKUU

End Connection Design:

Elbow 1st end

MRC:

The physical configuration of the outside of the end connection.AKUU

End Connection Design:

Elbow 2nd end

MRC:

The name of the fitting and/or component and the element, compound, or mixture of which it is fabricated.AKXL

End Fitting Component And Material:

Complete fitting steel all ends

MRC:

The name of the fitting and/or component and the plating, dip and/or coatingthat cannot be wiped off. plating and/or coating is any chemical and/or metallic additive, electrochemical or mild mechanical process which protects the surface.AKXM

Fitting Component And Surface Treatment:

Complete fitting cadmium 1st end

MRC:

Indicates the type of connection/s/.AWLS

Connection Type:

Recessed flange 1st end

MRC:

Indicates the type of connection/s/.AWLS

Connection Type:

Recessed flange 2nd end

MRC:

Indicates whether or not the second end is identical to the first end.CQBB

Second End Relationship With First End:

Not identical

MRC:

The minimum internal pressure rating,determined by destruction tests,at which the item can be expected to rupture.CQBD

Burst Test Pressure:

20000.0 pounds per square inch

MRC:

An indication of whether or not the end has the capability to rotate.CQBG

First End Swivel Action Capability:

Not included

MRC:

The material and formation identifying the structural characteristic/s/ of the item and location.CQCS