رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.375 inches and 0.376 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
1.094 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
1.000 inches
MRC:
A numeric value that reflects the hardness of a metallic item when used in conjunction with a hardness rating scale.AETC
Metallic Hardness Rating:
35.0 rockwell c and 40.0 rockwell c
MRC:
The distance laterally from tip to tip of the fork.AJSD
Fork Span Width:
Between 0.312 inches and 0.317 inches
MRC:
The length of a straight line which passes through the center of a securing pin hole,and terminates at the circumference.AKYE
Securing Pin Hole Diameter:
Between 0.216 inches and 0.223 inches
MRC:
The distance along a straight line from the rod connecting end at right angle to the geometric axis of the securing pin hole center.AKYH
Distance From Center Of Securing Pin Hole To Rod End:
0.500 inches
Distance From Pivot Pinhole Center To Rod Connection End:
Between 2.495 inches and 2.505 inches
Fork Arm Thickness:
0.094 inches
MRC:
The measurement between specified points of the fork,in distinction from height.AKYX
Fork Depth:
Between 1.168 inches and 1.208 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4140
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Sae assn standard single material response or mil-s-22141, comp ic, annealed military specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Phosphate manganese
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-p-16232, type m, class 2 military specification single treatment response
