رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Has two 0.232 in. Min, 0.240 in. Maximum diameter holes; consists of one 2.250 in. Min, 2.750 in. Maximum thk by 9.750 in. Min, 10.250 in. Maximum w by 16.250 in. Min, 16.750 in. Maximum lg polyurethane foam block and six fasteners
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Flat
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.311 inches and 0.318 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
11.625 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, multi holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
17.500 inches
MRC:
A measurement of a straight line from the midpoint of a rounded corner to its periphery.ADNU
Corner Radius:
Between 0.219 inches and 0.281 inches
Hole Quantity Along Length:
2
Hole Quantity Along Width:
4
Distance Between Holes Along Length:
6.250 inches
Distance Between Holes Along Width:
11.000 inches
Distance From First Hole Centerline To End Along Length:
2.500 inches
Distance From First Hole Centerline To End Along Width:
0.312 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
0.125 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Special
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Unthreaded hole
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-a-8625, type 1, cl 2 military specification single treatment response
